• Post Your Current WIP V.3!: Tutorials, Tools and Model Packs Galore (GM13 googogogo)
    5,225 replies, posted
  • Avatar of Balto-the-Wolf-
  • [QUOTE=Amplar;35779613][t]http://i890.photobucket.com/albums/ac109/XanderKarbine/Gmod 2/gm_drivingmap_mk1-95_beta0090.jpg[/t] [t]http://i890.photobucket.com/albums/ac109/XanderKarbine/Gmod 2/gm_drivingmap_mk1-95_beta0091.jpg[/t] [t]http://i890.photobucket.com/albums/ac109/XanderKarbine/Gmod 2/gm_drivingmap_mk1-95_beta0095.jpg[/t] [t]http://i890.photobucket.com/albums/ac109/XanderKarbine/Gmod 2/gm_drivingmap_mk1-95_beta0096.jpg[/t] first proper 8x8, full suspension, and my first use of anti-roll bars. 10 out of the 18 tons in this thing is physical mass driver's hatch opens and stuff 107 props[/QUOTE] Damn, that thing looks awesome
  • [QUOTE=Amplar;35779613][t]http://i890.photobucket.com/albums/ac109/XanderKarbine/Gmod 2/gm_drivingmap_mk1-95_beta0090.jpg[/t] [t]http://i890.photobucket.com/albums/ac109/XanderKarbine/Gmod 2/gm_drivingmap_mk1-95_beta0091.jpg[/t] [t]http://i890.photobucket.com/albums/ac109/XanderKarbine/Gmod 2/gm_drivingmap_mk1-95_beta0095.jpg[/t] [t]http://i890.photobucket.com/albums/ac109/XanderKarbine/Gmod 2/gm_drivingmap_mk1-95_beta0096.jpg[/t] first proper 8x8, full suspension, and my first use of anti-roll bars. 10 out of the 18 tons in this thing is physical mass driver's hatch opens and stuff 107 props[/QUOTE] Looks great, planning to make a video?
  • Avatar of Frankess
  • For christ's sake stop replaying messages along with all images. Most of us have a scroll wheel in a mouse. And Karbine, since your APC was too realistic I felt that is my duty to bring order in this thread. Behold! [t]http://i262.photobucket.com/albums/ii113/Frankess/karbineisgaaaaaaay.jpg[/t]
  • [QUOTE=Frankess;35780747]For christ's sake stop replaying messages along with all images. Most of us have a scroll wheel in a mouse. And Karbine, since your APC was too realistic I felt that is my duty to bring order in this thread. Behold! [t]http://i262.photobucket.com/albums/ii113/Frankess/karbineisgaaaaaaay.jpg[/t][/QUOTE] cool, i have a scroll wheel too!
  • Avatar of Unslinga
  • [QUOTE=Amplar;35779613][t]http://i890.photobucket.com/albums/ac109/XanderKarbine/Gmod 2/gm_drivingmap_mk1-95_beta0090.jpg[/t] first proper 8x8, full suspension, and my first use of anti-roll bars. 10 out of the 18 tons in this thing is physical mass driver's hatch opens and stuff 107 props[/QUOTE] This is awesome, but where can I find those wheels?
  • Avatar of Amplar
  • ep2/css i think [editline]1st May 2012[/editline] also fucking lol @ rainbow carrier
  • Avatar of Calamity
  • Just made my first proper holo speedo : [QUOTE][IMG]http://cloud.steampowered.com/ugc/596969429151164458/7C78BF0513B90B1F9D0F385391252832BD104F4C/[/IMG][/QUOTE] Also, a holo turbo: [QUOTE][IMG]http://cloud.steampowered.com/ugc/596969429147501513/F72C8B97F7C37CBDBEA6E317AF571A0B93281E4F/[/IMG][/QUOTE]
  • Avatar of kepper
  • I liek mechs. No seriously, I do. I'm working on a multi-crew Steel Battalion style mech. Just thought I'd show progress so far. [img]http://dl.dropbox.com/u/30622781/Screenshots/Garrysmod/freespace06_v2-10001.jpg[/img] [img]http://dl.dropbox.com/u/30622781/Screenshots/Garrysmod/freespace06_v2-10002.jpg[/img] [img]http://dl.dropbox.com/u/30622781/Screenshots/Garrysmod/freespace06_v2-10003.jpg[/img] [img]http://dl.dropbox.com/u/30622781/Screenshots/Garrysmod/freespace06_v2-10013.jpg[/img]
  • Avatar of filipegroh
  • [QUOTE=kepper;35797462]I liek mechs. No seriously, I do. I'm working on a multi-crew Steel Battalion style mech. Just thought I'd show progress so far. mech [/QUOTE] It looks awsome, tough severely undergunned. Anyone got ideas on how I could make an E2 that handles the Gear on ACF engine? Was thinking about auto-changing according to speed/increase and decreasing from input but I dunno how to check the gear.
  • It's rough and untested, but try this on for size. I may improve it later when I have time. [code] @name Automatic ACF Transmission @inputs RPM ClutchIn @outputs Gear ClutchOut @persist PBLow PBHigh Gears @trigger RPM Clutch if(first()){PBLow=<low end of engine's power band>,PBHigh=<high end of engine's power band>,Gears=<number of gears in your transmission>,Gear=0} if(!ClutchIn){ if(RPM>PBHigh){Gear++}else{Gear=Gear} if(RPM<PBLow){Gear--}else{Gear=Gear} ClutchOut=0} else{Gear=Gear,ClutchOut=1} if(Gear<0){Gear=0} elseif(Gear>Gears){Gear=Gears} else{Gear=Gear} [/code] Edit: Saw and fixed a misnamed variable.
  • Avatar of Metacore
  • Got bored, here's a little car WIP. [IMG]http://cloud.steampowered.com/ugc/576703458485684051/E571526447F3969A8D7980F671EA3E3AC8AB27E9/[/IMG]
  • Avatar of filipegroh
  • [QUOTE=Sir Lulzalot;35798554]It's rough and untested, but try this on for size. I may improve it later when I have time. [code] @name Automatic ACF Transmission @inputs RPM ClutchIn @outputs Gear ClutchOut @persist PBLow PBHigh Gears @trigger RPM Clutch if(first()){PBLow=<low end of engine's power band>,PBHigh=<high end of engine's power band>,Gears=<number of gears in your transmission>,Gear=0} if(!ClutchIn){ if(RPM>PBHigh){Gear++}else{Gear=Gear} if(RPM<PBLow){Gear--}else{Gear=Gear} ClutchOut=0} else{Gear=Gear,ClutchOut=1} if(Gear<0){Gear=0} elseif(Gear>Gears){Gear=Gears} else{Gear=Gear} [/code] Edit: Saw and fixed a misnamed variable.[/QUOTE] Ah, thanks for the help, I was trying to change gears based on speed, not on the engine RPM!
  • [QUOTE=Sir Lulzalot;35798554]It's rough and untested, but try this on for size. I may improve it later when I have time. [code] @name Automatic ACF Transmission @inputs RPM ClutchIn @outputs Gear ClutchOut @persist PBLow PBHigh Gears @trigger RPM Clutch if(first()){PBLow=<low end of engine's power band>,PBHigh=<high end of engine's power band>,Gears=<number of gears in your transmission>,Gear=0} if(!ClutchIn){ if(RPM>PBHigh){Gear++}else{Gear=Gear} if(RPM<PBLow){Gear--}else{Gear=Gear} ClutchOut=0} else{Gear=Gear,ClutchOut=1} if(Gear<0){Gear=0} elseif(Gear>Gears){Gear=Gears} else{Gear=Gear} [/code] Edit: Saw and fixed a misnamed variable.[/QUOTE] There's really not any way to ask this question without sounding stupid, but exactly what happens when you put an if statement inside an if statement?
  • Avatar of shadowscion
  • [QUOTE=MrWhite;35815886]There's really not any way to ask this question without sounding stupid, but exactly what happens when you put an if statement inside an if statement?[/QUOTE] The branched if-statement will only return if the root is true. [code] if (On) { if (A) { B = 1 } } [/code] B is equal to 1 if A is true, but only if On is also true. Looking at his code, if input ClutchIn isn't being pressed, the gearing is increased/decreased.
  • [QUOTE=filipegroh;35814571]Ah, thanks for the help, I was trying to change gears based on speed, not on the engine RPM![/QUOTE] You never want to change your gears based on your speed, the point of a multi-gear transmission is to keep the engine within it's power band (the range of RPM where the engine is the most efficient and outputs the most power) without limiting speed and torque to undesirable values. For instance, in the first gear of a transmission, the engine spins the most times to produce one turn of the driving wheels, the result is a low-speed output with lots of torque, good for getting a vehicle moving, but not for moving quickly. As you increase your speed in while in gear one, the engine will approach the upper end of its power band and its redline zone. To keep the engine in its power band and keep it from redlining, you shift into second gear, in which the engine spins fewer times per rotation of the drive wheels, the result is the engine RPM falling back to the lower end of its power band (because it doesn't need to spin as many times to move the car at the same speed), and a gearing that allows you to go faster, but isn't as good as first for getting the vehicle moving or other jobs which require a lot of torque. The same applies each time you shift up a gear. EDIT: Also, upon further inspection (as in, actually testing it in game), I've found that my code doesn't work. I'll rewrite it and get it going some time over the weekend.
  • I realized that as I was away for 2-3 weeks, most of the servers I used to go on are either shut down or are just dead with 0 players on at all times. Did anything happen to the building community while I was away?
  • Avatar of Sestze
  • [QUOTE=Jackpody;35820159]I realized that as I was away for 2-3 weeks, most of the servers I used to go on are either shut down or are just dead with 0 players on at all times. Did anything happen to the building community while I was away?[/QUOTE] It's around finals time.
  • Avatar of Balto-the-Wolf-
  • [img]http://dl.dropbox.com/u/61950362/Marlin/freespace06_v2-10030.jpg[/img] [img]http://dl.dropbox.com/u/61950362/Marlin/freespace06_v2-10031.jpg[/img] [img]http://dl.dropbox.com/u/61950362/Marlin/freespace06_v2-10032.jpg[/img] [img]http://dl.dropbox.com/u/61950362/Marlin/freespace06_v2-10033.jpg[/img] Marlin box wing, planned to be fin only with two rear facing propellers. Wing Design inspirations: [img]http://www.popsci.com/files/imagecache/article_image_large/articles/PSC0512_JT_116.jpg[/img]
  • Avatar of One Ear Ninja
  • [QUOTE=Balto-the-Wolf-Dog;35833309][img]http://dl.dropbox.com/u/61950362/Marlin/freespace06_v2-10030.jpg[/img] [/QUOTE] Average pubbie on Baik
  • Avatar of RedReaper
  • I made a Chinese car. [media]http://www.youtube.com/watch?v=xM5Y6yMjc-s&feature=youtu.be[/media]
  • Avatar of Balto-the-Wolf-
  • [QUOTE=Balto-the-Wolf-Dog;35833309][img]http://dl.dropbox.com/u/61950362/Marlin/freespace06_v2-10030.jpg[/img] [img]http://dl.dropbox.com/u/61950362/Marlin/freespace06_v2-10031.jpg[/img] [img]http://dl.dropbox.com/u/61950362/Marlin/freespace06_v2-10032.jpg[/img] [img]http://dl.dropbox.com/u/61950362/Marlin/freespace06_v2-10033.jpg[/img] Marlin box wing, planned to be fin only with two rear facing propellers. Wing Design inspirations: [img]http://www.popsci.com/files/imagecache/article_image_large/articles/PSC0512_JT_116.jpg[/img][/QUOTE] This thing demands a PFD and MFD, anyone know some GPU and willing to teach me? I've tried a number of times on my own to no avail. [editline].[/editline] [b]Damnit worst pageking ever[/b]
  • Avatar of RedReaper
  • I had to have the American engine start in like 4th gear, in 1st it just flipped over[img]http://i34.photobucket.com/albums/d122/someemoticons/emot-saddowns.gif[/img]
  • Avatar of harrycarry250
  • My favorite car, Land Rover forward control 101 [IMG]http://cloud.steampowered.com/ugc/596969657761818309/F0EA828D724B047A099980B7B165D5732F43C805/[/IMG] [IMG]http://cloud.steampowered.com/ugc/596969657761830434/600D7BA9A1AA3A118DC007FC3B0064DBA1F4971C/[/IMG] [IMG]http://cloud.steampowered.com/ugc/596969657761822150/F8074DEE6190B370492424B29EE116A8F9A44C7C/[/IMG] You may say it is a simple car therefor easy. Well, it was easy but I love it. I love all Land Rovers!
  • Avatar of RedReaper
  • Love the forward control. [media]http://www.youtube.com/watch?v=YhZNWsql95Q[/media] Visclip didn't record right. [editline]5th May 2012[/editline] [QUOTE=Balto-the-Wolf-Dog;35838923]This thing demands a PFD and MFD, anyone know some GPU and willing to teach me? I've tried a number of times on my own to no avail. [editline].[/editline] [B]Damnit worst pageking ever[/B][/QUOTE] That's an epic plane, and I know some basic EGP.
  • Working on a Vespa. So many prooppppssss. First project in like a month. [img]http://cloud.steampowered.com/ugc/577829358442736728/657A2DA13CAE749E2EAF472938174F5539FD0AE7/[/img]
  • Avatar of harrycarry250
  • How do you plan to keep the vehicle upright? not with the keep upright tool... At least I hope. Looking amazing though! Please tell me that you'll be putting a 1 cylinder engine in it!!! edit- update on the Landy. Now has a I8 engine! [IMG]http://cloud.steampowered.com/ugc/596969657765896309/D5CF4CB374879EB3BFAC5559DE167A1D199FE092/[/IMG] [IMG]http://cloud.steampowered.com/ugc/596969657765905969/B069E6B183599E95FD12D16DB6C1CBE32DCCD72E/[/IMG] [IMG]http://cloud.steampowered.com/ugc/596969657765911559/51F55A5C552A72CB13D03CF44AB7A9A83B31CDEF/[/IMG]
  • Avatar of Balto-the-Wolf-
  • [QUOTE=RedReaper;35841688]Love the forward control. [media]http://www.youtube.com/watch?v=YhZNWsql95Q[/media] Visclip didn't record right. [editline]5th May 2012[/editline] That's an epic plane, and I know some basic EGP.[/QUOTE] EGP is too slow to update. Need full GPU. [editline].[/editline] Nevermind, necessity is the mother of forcing oneself to learn something. I managed myself
  • [QUOTE=harrycarry250;35843591]How do you plan to keep the vehicle upright? not with the keep upright tool... At least I hope. Looking amazing though! Please tell me that you'll be putting a 1 cylinder engine in it!!! [/quote] I'm thinking of adding a smaller sidecar to it, so I don't need to worry about balance too much. Also White, tried building it generally just using HL2 props, but none of them really fitted it properly. It does use a couple HL2 props here and there though.
  • Avatar of Balto-the-Wolf-
  • Marlin with wing geometry, pusher-prop nacelles, and new GPU MFDs [img]http://dl.dropbox.com/u/61950362/Marlin/gm_buttes0023.jpg[/img] [img]http://dl.dropbox.com/u/61950362/Marlin/gm_buttes0028.jpg[/img] [img]http://dl.dropbox.com/u/61950362/Marlin/gm_buttes0029.jpg[/img] [img]http://dl.dropbox.com/u/61950362/Marlin/gm_buttes0032.jpg[/img]